Interlogix Concord Express Installation Manual Manuel d'utilisateur télécharger pdf (Page 82)

Chapter 3

76 Concord Express Installation Instructions

Code

System event

699

System Armed Itself (during service or power-

up)

Table 7: System alarm sounds

Code

System event

Fire

Repeating series of three beeps

Police/Intrusion

Continuous tone

Auxiliary

Rapid beeps

Changing Fixed Display LCD Touchpad Chime and

Trouble Beep Tones

The frequency (pitch) of chime and trouble beep tones from a fixed display

touchpad can be adjusted to a more desirable or distinct tone, and to

compensate for hearing impaired persons.

Note: For the comfort of users, chime and trouble beep tones revert to the

quieter, default frequency while the keypad is in use (during or within 15 seconds

of any button activity at that specific touchpad).

To change status tone pitch:

1. Press and hold the * and 0 buttons together until you hear a steady tone, then

release the buttons.

2. Press and hold 1 to lower the pitch or press and hold 2 to raise the pitch.

3. When the desired pitch is heard, release the button.

If there is no touchpad activity for about 15 seconds, the steady tone stops

sounding.

Troubleshooting

This section describes what to do if you experience problems with system

operation. Topics are in alphabetical for easy reference.

Access code

Customer cannot remember access code(s).

1. Check your records to see if you have the customer’s access code(s) on file.

2. Verify the access code(s) using the Downloader.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 116 117

Pas de commentaire

Interlogix Concord Express Installation Manual Manuel d'utilisateur Page 82