Interlogix NS4702-24P-4S-4X Command Line Guide Manuel d'utilisateur Page 28

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 434
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 27
-28-
4. Repeat step 1 to check if the IP address is changed.
Store current switch configuration
5. At the “#” prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 3-4: Saving Current Configuration Command Screen
If the IP is successfully configured, the Managed Switch will apply the new IP address setting immediately. You can access the
Web interface of the Managed Switch through the new IP address.
If you are not familiar with the console command or the related parameter, enter ?” anytime
in console to get the help description.
Vue de la page 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 433 434

Commentaires sur ces manuels

Pas de commentaire