Interlogix TruVision IP Camera Configuration Manual Manuel d'utilisateur télécharger pdf (Page 32)

2BChapter 3: Camera configuration

28 TruVision IP Camera Configuration Manual

3. Click Edit to set the arming schedule for the alarm input. See “To set up

motion detection” for more information.

4. Check the checkbox to select the linkage method.

5. Click Save to save changes.

To define alarm output:

1. In the Events folder, click the Alarm Output tab to open its window.

2. Select one alarm output channel from the Alarm Output drop-down list. You

can also set a name for the alarm output.

3. The delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min or 10min.

The delay time refers to the time duration that the alarm output remains in

effect after alarm occurs.

4. Click Edit to set the arming schedule for the alarm input. See “To set up

motion detection” for more information.

5. Click Save to save changes.

Snapshot parameters

You can configure scheduled snapshots and event-triggered snapshots. The

captured snapshots can be stored in the SD card (if supported) or the NAS. You

can also upload the snapshots to an FTP server.

Figure 11: Snapshot menu

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

Pas de commentaire

Interlogix TruVision IP Camera Configuration Manual Manuel d'utilisateur Page 32