Interlogix NS2503-24P/2C Installation Guide Manuel d'utilisateur télécharger pdf (Page 6)

IFS NS2503-24P/2C Quick Guide

Once the terminal has connected to the device, turn on the Managed Switch, and the terminal will display the status of testing

being performed.

Then, the following message asks the login user name and password. The factory default user name / password as following

and the login screen in Figure 3 appears.

Username: admin

Password: admin

Figure 3: Managed Switch Console Login Screenshot

1. For security reasons, please change and memorize the new username and password after

this first setup.

Username Max: 6, Min: 1 characters.

Password Max: 6, Min: 1 characters.

2. Only accept command in lowercase letter under console interface.

Configure IP address

The Managed Switch is shipped with the following default IP address.

IP Address : 192.168.0.100

Subnet Mask : 255.255.255.0

To check the current IP address or modify a new IP address for the Switch, please use the following procedures:

 Show the current IP address

1. On ”Switch# ” prompt, enter “configure”.

2. On ”Switch(config)# ” prompt, enter “show ip”.

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Interlogix NS2503-24P/2C Installation Guide Manuel d'utilisateur Page 6