Interlogix MS-PoE Manuel d'utilisateur

P/N 1069179-EN • REV 1.01 • ISS 14JUL10 IFS MS-PoE Injector User Manual

Chapter 1: Overview Product Specifications IFS Model MS-PoE Interface Ethernet Copper Port 1 x 10/100Base-TX for data in RJ-45 connector Ethernet +

Chapter 1: Overview TIA/EIA-568, Category 5/5e cable Ethernet cablePhysical Specifications Dimensions (W × D × H): 2.87” x 2.17” x 0.94” / 73 x 55 x

Chapter 1: Overview 6 MS-PoE Injector User Manual

Chapter 2 Hardware Installation This product provides two different running speeds - 10Mbps, 100Mbps in the same device and automatically distinguish

Chapter 2: Hardware Installation If it is very difficult to find a power socket for an AC-DC Adapter of your non-IEEE 802.3af networked device, the MS

Chapter 2: Hardware Installation Figure 2: Connection to the IEEE 802.3af device 1. Switch 2. Power 3. Camera 4. Data 100 Base-TX UTP 100 Base-TX

Chapter 2: Hardware Installation 10 MS-PoE Injector User Manual 4. Power on the remote device. The LED indicator on SP-POE remains on. Figure 3: Con

MS-PoE Injector User Manual i Copyright© 2011 UTC Fire & Security. All rights reserved. This document may not be copied in whole or in part or

ii MS-PoE Injector User Manual FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device, purs

Content Chapter 1 Overview 1 Introduction 2 Product Overview 3 Product Specifications 4 Physical Specifications 5 Chapter 2 Hardware Instal

Chapter 1 Overview The IFS MS-PoE is an IEEE 802.3af Power over Ethernet Injector that provides 48VDC power over Ethernet cables (PoE). Package Cont

Chapter 1: Overview Introduction The IFS MS-PoE IEEE 802.3af Power over Ethernet Injector inserts DC Voltage into Cat.5 cable, allowing the cable betw

Chapter 1: Overview Product Overview Figure 1 shows the right and left side views of the MS-PoE injector. Figure 1: MS-PoE right and left side panels